PDRinfo.ru

Текущее время: Пт сен 21, 2018 4:03

Часовой пояс: UTC + 3 часа [ Летнее время ]




Начать новую тему Ответить на тему  [ 1 сообщение ] 
Автор Сообщение
 Заголовок сообщения: Что такое PDR!
СообщениеДобавлено: Пн дек 15, 2014 16:38 
Не в сети
Преподаватель (PDR-DOL)
Аватара пользователя

Зарегистрирован: Вт фев 15, 2011 0:27
Сообщения: 4109
Откуда: Россия. Краснодарский край, г. Ейск
Пока скину ссылку на англоязычную вики. Русская содержит множество неподтвержденных данных из непроверенных источников. Хотя в англоязычной версии тоже можно редактировать некоторые моменты.
Для тех кто не в курсе.

Википедия это свободная энциклопедия, которую может редактировать каждый.


https://en.wikipedia.org/wiki/Paintless_dent_repair

Paintless Dent Repair (PDR), also known as "Paintless Dent Removal", describes a method of removing minor dents from the body of a motor vehicle.[1]
A wide range of damage can be repaired using PDR as longs as the paint surface is intact. PDR may be used on both aluminum and steel panels.

The most common practical use for PDR is the repair of hail damage, door dings, minor creases, and minor plastic bumper indentations.

The method can also be utilized to prepare a damaged panel for repainting, when it is referred to as "push to paint" or "push for paint".

Limiting factors for a successful repair using PDR include the flexibility of the paint (most of today's refined automotive paint finishes allow for successful PDR)

and the extent to which the metal has been stretched by the damage, which depends on the thickness of the metal and the intensity of the impact.
Generally speaking, the shallower the dent, the greater the likelihood of paintless dent repair being a suitable option. Even dents several inches
in diameter can be repaired by this method as long as the metal and paint are not stretched. Most experienced technicians can repair a shallow large
dent or crease to an acceptable level, but very sharp dents and creases may not be suitable for PDR.

History of techniques[edit]

PDR was introduced to North American from Europe in 1983 by Dent Wizard International founder Natalio Balderrama, and consumer awareness of the method
has grown in recent years.[2]

Techniques[edit]

The most common PDR techniques utilize metal rods and body picks to push out the dents from the underside of the body panel.
Glue and specially designed tabs may be used to pull out the dents from the outside of the panel. Fine tuning the repair often
involves tapping down the repair to remove small high spots. Quality technicians blend high spots to match the texture of the paint.
Pushing too hard can create high spots that cause the clear coat to split or crack. Experienced technicians will avoid cracking or
chipping the paint 99% of the time, although a painted surface in poor condition will crack despite the best skill. When damage is
so great that body filler is necessary, a PDR technician may "push to paint", resolving most of the damage before minor filling, sanding,
and painting, thereby saving time and cost.

The process of Paintless Dent Repair/ Portable Dent Reflection requires a technician to manipulate precise locations of metal to the
correct height, which can only be observed by the use of a PDR reading instrument such as a Portable Dent Reflection Tools board
or Paintless Dent Repair light. Fluorescent or LED lighting, or in some cases a reflection board, may be used to visualize the deformation
of the dent and to aid the technician in locating the tip of the tool being used to push the metal. Without a reflection from a light or board
to read the dent, the fine detail of the process is inaccessible to the technician.

Paintless dent removal requires years of trial-and-error experience to master. Often referred to as an "art," it demands more hand-eye coordination
than anything else.[2]

http://www.napdrt.org/pdr_whatis.htm

_________________
Тел. +7 918 1632559
mail pdrinfo@mail.ru

Международная Группа PDRINFO на Facebook - https://www.facebook.com/groups/PDRINFO

Информационный Канал PDRINFO на YouTube - http://www.youtube.com/c/PDRINFO

Новостная Группа PDRINFO В Контакте - https://vk.com/pdrinfo

Инстаграм - https://www.instagram.com/pdrinfo/


Вернуться к началу
 Профиль  
 
Показать сообщения за:  Поле сортировки  
Начать новую тему Ответить на тему  [ 1 сообщение ] 

Часовой пояс: UTC + 3 часа [ Летнее время ]


Кто сейчас на конференции

Сейчас этот форум просматривают: нет зарегистрированных пользователей и гости: 1


Вы не можете начинать темы
Вы не можете отвечать на сообщения
Вы не можете редактировать свои сообщения
Вы не можете удалять свои сообщения

Найти:
Перейти:  
cron
POWERED_BY
Русская поддержка phpBB